Simulation Model of Hybrid Renewable Sources Integration Using MATLAB/Simulink

Document Type : Original Article

Authors

1 Electrical Power and Machines, Faculty of Engineering, Zagazig University, Egypt

2 Electrical Power and Machines , Faculty of engineering. Zagazig universty

Abstract

Renewable energy is an indispensable source at present, where many resorted to the use of renewable energy, but there is a problem as a discontinuous source, according to climatic conditions and the surrounding environment. Thus, researchers worked on a new system to control climate changes affecting the production of renewable energy, which is a Hybrid system where Uses more than one source to maintain energy continuity and uses an energy storage system. In this paper, three different sources of renewable energy (solar energy - wave energy - fuel cell energy) are integrated and an energy storage system was used. Buck-boost converter circuits were used in the three sources and connecting them to the DC busbar. The inverter was used to convert from DC to AC to supply the load. A new integrating system was used to connect three sources and store energy at the same time from the surplus energy. When there is a problem with one of the sources, the battery bank feeds the system directly. The simulation model of the whole hybrid power system is implemented using Matlab / Simulink. It is clear from the results that the controller has high efficiency and accuracy and has the ability to integrate more than two sources.

Keywords

Main Subjects

The Egyptian International Journal of Engineering Sciences and Technology
Volume 37, Issue 2
Electrical Engineering
March 2022
Pages 39-48

Files

Share

How to cite

Statistics